YURTBAY SERAMİK 2021

Resistance to Staining Floor Tiles Technical Specifications Test Standards EN 14411:2016 - Group BIb Annex H YURTBAY SERAMIK Length and Width (%) 7cm≤N<15cm ±0.9mm ±0.80mm EN ISO 10545-2 N≥15cm ±%0,6 ±2,0mm ±%0.4 Thickness (%) 7cm≤N<15cm ±0.5mm ±0.40mm EN ISO 10545-2 N≥15cm ±%5 ±0,5mm ±%0.4 Straightness of Sides (%) 7cm≤N<15cm ±0.75mm ±0.65mm EN ISO 10545-2 N≥15cm ±%0,5 ±1,5mm ±0.65mm Rectangularity (%) 7cm≤N<15cm ±0.75mm ±%0.4 EN ISO 10545-2 N≥15cm ±%0,5 ±2,0mm ±%0.4 Centre Curvature (%) 7cm≤N<15cm ±0.75mm ±0.65mm EN ISO 10545-2 N≥15cm ±%0,5 ±2,0mm ±%0.4 Edge Curvature (%) 7cm≤N<15cm ±0.75mm ±0.65mm EN ISO 10545-2 N≥15cm ±%0,5 ±2,0mm ±%0.4 Warpage (%) 7cm≤N<15cm ±0.75mm ±0.65mm EN ISO 10545-2 N≥15cm ±%0,5 ±2,0mm ±%0.4 Water Absorption (%) % 0,5 < E ≤ % 3,0 Individual Maximum %3,3 E ≤ % 3,0 EN ISO 10545-3 Breaking Strength ( N ) Thickness ≥ 7,5 mm Not less than 1100 Min. 1300 EN ISO 10545-4 Breaking Strength ( N ) Thickness < 7,5 mm Not less than 700 Min. 700 EN ISO 10545-4 Modulus of Rupture (N/mm2) Min. 30 Individual Min. 27 Min. 34 EN ISO 10545-4 Crazing Resistance Required ( 5 Atm. for 2 hours ) Resistant ( 5 Atm. for 2 hours ) EN ISO 10545-11 Thermal Shock Resistance Required ( At 150 oC for 10 Cycles ) Resistant to 200 oC EN ISO 10545-9 Resistance to Surface Abrasion of Glazed Tiles As indicated by the Manufacturer Changes According to the products EN ISO 10545-7 Impact Resistance Required Resistant EN ISO 10545-5 Frost Resistance Required Resistant EN ISO 10545-12 Resistance to Household Chemicals and swimming pool salts Minimum Class GB Minimum Class GB EN ISO 10545-13 Resistance to Acids and Alcalis As indicated by the Manufacturer Changes According to the products EN ISO 10545-13 Resistance to Staining Minimum Class 3 Minimum Class 3 EN ISO 10545-14 Ramp Slip Resistance Where Required Where Required DIN 51130- DCOF > 0.42 TECHNICAL SPECIFICATIONS 177